- Capacity Capacity VA/W 2000/2000
- Input Nominal Voltage 208V/220V/230V/240V
- Voltage Range 120~140V under 25% load
- 140~160V under 50% load
- 160~180V under 75% load
- 180~276V under 100% load
- Frequency 50Hz to 60Hz auto sensing
- Output Voltage (on battery) 208V (derating 90%, 220V/230V/240V ±2% (selectable output voltage)
- Frequency (on battery) 50Hz/60Hz ±0.25Hz
- Wave form Pure sine wave
- Transfer time 0ms
- Overload recovery Auto transfer to UPS
- Harmonic Distortion ≤ 2.5% THD at linear load
- Normal efficiency mode (AC to AC) 90%
- High efficiency mode (AC to AC) > 95%
- Cress factor 3:1
- Connections 8x Standard IEC C13
- Protection Surge Protection 230V (IEEE C61000-4-5 level 3)
- Overload protection (on main) 105~120% for 30 seconds and 121~150% for 10 seconds
- Overload protection (on battery) 101~109% for 10 seconds and 110~120% for 3 seconds
- Short circuit protection UPS output cut off immediately or input fuse/circuit breaker protection
- System/Display Warning Visual display Input/Output Voltage,
- Input/output Frequency,
- On-line mode,
- Back-up mode,
- Battery Capacity Level,
- Load Level
- Audible alarm (battery back-up) Beep every 5 seconds
- UPS fault Continuous beeping sound and LCD display
- Battery Type Sealed, maintenance-free lead acid battery
- Typical recharge time 4 hours to 90%
- Battery quantity 12V 7Ah x6
- Management Self-test, adjustable battery transfer pointes and alarm settings
- Battery protection Cut off without draining any current when battery is low
- Cold start (DC start) Yes
- Back up time (full load/half load) 1.6 to 3 mins/7 to 9 mins
- General Input inlet IEC 320 (230V)
- Receptacles IEC 320 (230V)
- Communication interface RS-232 - USB B-type, Optional SNMP slot
- Audible Noise < 45dBA(1m from surface)
- Operation temperature 0 ~ 40°C
- Storage temperature -20 ~ 50°C
- Altitude 2000 meters max
- Relative humidity 0-95%, non-condensing
- Dimensions (mm) 191 (w) x 411 (d) x 327 (h)
- Weight 22.9kg